Pioneer 101 Manual
- Pioneer 101 Metal Detector Manual
- Pioneer 101 Cd Player
- Pioneer Sr-101 Manual
- Pioneer Pd 101 Owner S Manual
OWNER’S MANUAL The Basics of Metal Detecting Your Pioneer 101 Metal Detector incorporates Motion Detection Technology. Movement over an object is required in order for the machine to detect the object and emit a tone. While holding your Pioneer 101 Metal Detector as indicated in the. Pioneer ER-101 Service Manual (JP) Item Preview remove-circle Share or Embed This Item. EMBED (for wordpress.com hosted blogs and archive.org item tags) Want more? Advanced embedding details, examples, and help! 1 Pioneer ER-101.
EASY ASSEMBLY
Search
Cable
Stem
Housing
Lower
Assembling your Pioneer 101 Metal
tools. Just follow these steps:
1Using the supplied bolt and
coil to the lower stem.
2Press the button on the upper
the lower stem into the upper
Adjust the stem to a length that lets you
with your arm relaxed at your side.
3Wind the search coil cable
slack in the cable to let you adjust
uneven ground. Then tighten the
coil.
To adjust the coil,
●
matching connector on the control
pins line up correctly.
•Do not force the plug in.
•To disconnect the cable, pull out
Lower
Upper
Connector
control housing
Knurled
Bottom view
The Basics
Pioneer 101 Metal Detector Manual
Your Pioneer 101 Metal Detector incorporates Motion Detection
Technology. Movement over an object is required in order for the
While holding your Pioneer 101 Metal Detector as indicated in the
picture to the right, sweep the search coil slowly from side to side. While
sweeping, maintain the search coil level with the ground.
If the detector chatters, reduce the sensitivity by turning the left knob (Sensitivity)
When searching a possible target, move the search coil repeatedly over the target. Be certain that
the signal repeats during each pass over the target. If the tone does not repeat consistently, you
are probably detecting trash items or oxidation. Only dig up targets with repeatable tones.
Pioneer 101 Cd Player
•Do not test the detector on the floor of a home or building.
•Most floors contain metal which will interfere with the detector’s operation.
•Unless air testing or demonstrating, use outside only.
Pioneer Sr-101 Manual
PLEASE READ ALL INSTRUCTIONS BEFORE USING YOUR METAL DETECTOR
